4-8 Inch Low-Profile Recessed LED Ceiling Lights - Selectable White CCT

Description

The Super Slim Recessed LED Lights raise the standard for recessed lighting. Each fixture is designed for small spaces with limited height clearance, such as beams or ductwork. They are super easy to install and are IC-rated, meaning they can be in direct contact with insulation without overheating and do not require any can or housing. The lights are Energy Star certified and ETL listed, featuring outstanding energy efficiency. Damp-rated and airtight, these ceiling light kits are perfect for bathrooms, drop ceilings, outdoor soffits, and large space general lighting applications.

Color Selectable (3CCT Switch):

Inside the lights power unit, there is a switch to select output between 3000K warm white, 4000K neutral, and 5000K cool white.

The 2023 updated recessed downlights are now color selectable. Legacy, single CCT models are still purchasable in our closeout section while supplies last.

Size Options:

The Recessed lights are offered in 4,6, and 8-inch sizes. More detailed specifications for each light size are found in the table below.

Dimming

The strips are TRIAC dimmable and come with a list of suggested dimmers. Create the atmosphere you need with smooth dimming 0-100%.

Easy Installation

The ultra-thin profile of the light and the slim driver junction box make it easy to fit into your ceiling without interfering with anything else. Quick wire connections and push spring-loaded clips make installation a breeze. The mounting hole and driver sizes for each bulb are listed in the table below. Follow these five steps for easy installation:

1. With included wire nuts, connect green ground wires, white neutral wires, and black line wires.
2. Insert driver through mounting hole; mounting hardware included with two mounting holes on either side of the driver.
3. Connect the downlight to the driver box by inserting the male/female connectors and then twisting the threaded ring to secure the connection.
4. Don't forget to select your desired output from the switch inside the driver.
5. Push spring-loaded clips on the light upwards and insert the fixture base into the ceiling hole. Release the clips and they will pull the slim fixture up flush with the ceiling.

Technical Documentation

Specifications