MiniPuck DC PWM Dimmable Constant Current LED Driver
|Output Current (mA): 350, 500, 700 & 1000mA||Input Voltage Range (DC): 6-30VDC|
|Connection Options: 5 Pin or Surface Mount||UL Recognized Component|
|Dimming: PWM w/ 1000:1 Resolution||Compliant: ROHS|
|Protection: UVLO (Under-Voltage Lockout), Over-Temp||Control Pin Voltage Range: 1VDC - 30VDC|
|Efficiency: 96%||Small Form Factor: 0.79"(L) X 0.66"(W) X 0.43"(H)|
The MiniPuck, designed and manufactured in the US by LUXdrive, is a super small, PWM dimmable, DC input constant current LED driver for powering high-brightness LEDs. The two variations (G031/G032) allow for both pin and surface mount applications respectively and each of these models are available in standard output currents of: 350, 500, 700 and 1000mA. The MiniPuck is 96% efficient, engineered for reliability and perfect for prototyping and final product designs where size and efficiency are essential.
A full product review of the MiniPuck and LUXdrive is available on our site, here.
Connection & Mounting
Currently the MiniPuck is available in two different configurations. The circuitry on the G031 version is fully potted and connections made via 5-pins. The side with two pins, as labeled on the product, are the 'LED out' connections and the three on the bottom are for power-in and the DIM line.
The surface mount G032 version, as pictured to the right, is not potted and the connections are on the bottom of the board.
Control & Dimming
The MiniPuck is equipped with a PWM dimming control. The DIM line can handle a square wave between 1V and 30Vdc, which will provided steady dimming down to 5%.
G031/G032 MiniPuck Product Selection
|DC Input (VDC)||Output||PWM|
(L x W x H)
|G031-D-P-350||6||30||2.5||350||10%||96||Vin- 2.5V||5% to 100%||5-Pin||16mm X 18.2mm X 10.4mm|
|G031-D-P-500||6||30||2.5||500||10%||96||Vin- 2.5V||5% to 100%||5-Pin||16mm X 18.2mm X 10.4mm|
|G031-D-P-700||6||30||2.5||700||10%||96||Vin- 2.5V||5% to 100%||5-Pin||16mm X 18.2mm X 10.4mm|
|G031-D-P-1000||6||30||2.5||1000||10%||96||Vin- 2.5V||5% to 100%||5-Pin||16mm X 18.2mm X 10.4mm|
|G032-D-P-350||6||30||2.5||350||10%||96||Vin- 2.5V||5% to 100%||Surface Mount||12.9mm X 14.4mm X 5.8mm|
|G032-D-P-500||6||30||2.5||500||10%||96||Vin- 2.5V||5% to 100%||Surface Mount||12.9mm X 14.4mm X 5.8mm|
|G032-D-P-700||6||30||2.5||700||10%||96||Vin- 2.5V||5% to 100%||Surface Mount||12.9mm X 14.4mm X 5.8mm|
|G032-D-P-1000||6||30||2.5||1000||10%||96||Vin- 2.5V||5% to 100%||Surface Mount||12.9mm X 14.4mm X 5.8mm|
Absolute Maximum Ratings
|Control Pin Voltage||30VDC|
|Control Pin Frequency||2KHz|
Products You May Like
The A011 series LUXdrive™ FlexBlock LED buck-boost constant current driver is a low voltage DC input module for powering high-brightness LEDs.
Product ID : 0A011-D-V-xxx
Sale Price: $17.99
The 4006 series LUXdrive™ DynaOhm semi-conductor based resistor is a low voltage DC input (3-50Vdc) module for powering LED(s) 20mA, 25mA or 30mA.
Product ID : 04006-0xx
Sale Price: $2.63
The 7006 series LUXdrive™ BuckBullet LED driver is a low voltage AC input (8-24Vac) module for powering high-brightness LEDs at 350mA, 500mA or 700mA.
Product ID : 7006-H-xxx
Sale Price: $12.45