Flasher Module - For Flashing High Power LEDs
|Flash Rate: 2.5Hz (Call to customize)||Gray: Switch|
|Input Voltage: 9-32Vdc||Gray: Switch|
|Quiescent Current: 0.3mA @ 12V||Black: LED Driver -|
|6" 24ga colored wires for easy wiring:||Red: LED Driver +|
|Green: Battery -||Small form factor .78"x.78"x.43"|
|Yellow: Battery +||Weighs 8.1grams|
The LuxDrive D004 Flasher module connects between the power source and LED Driver to provide flashing for LEDs. When the two switch wires are open, power is passed directly from the power source to the LED driver causing the LED to be full on. When the two switch wires are connected, the flashing module causes the LED to flash at the selected Hz instead.
Product Video Overview:
Products You May Like
The 4016 series LUXdrive™ QuadPuck 4-Channel DMX interface is a low voltage DC input (5-32Vdc) module for controlling high-brightness LEDs.
Product ID : 04016
Sale Price: $99.98
This 12V amplifier is designed to simplify dimming loads larger than 72-watts by repeating the signal to 3 output channels each capable of 6A loads.
Product ID : LS-3R-6A
Sale Price: $34.99