Sauna-Rated IP68 High Temp RGBW LED Strip Light — 24V, 10mm, 5W/ft

Yes. It is engineered for high-temperature and high-moisture environments and has an operating range up to 90°C / 194°F. Keep it away from the heater and any localized area that may exceed that rating.

RGBW adds a separate 3000K Warm White LED channel to the red, green and blue channels. That produces more useful everyday white illumination than mixing RGB alone while retaining full-color capability.

Yes. Use a compatible 12–24V four-channel RGBW controller that can independently manage red, green, blue and white and is sized for the connected load.

The dedicated white channel is 3000K Warm White, a comfortable choice for indirect lighting beneath sauna benches, behind backrests and within architectural recesses.

A 16.4 ft roll uses approximately 82W based on the 5W/ft rating. With at least 20% headroom, use a 24V constant-voltage power supply rated 100W or greater.

No. Install the power supply, controller and other control electronics outside the sauna, where they are protected from excessive heat and moisture.

Yes. It can be cut every 4 inches at the designated cut points. A field cut breaks the factory seal at that end, so the end must be properly resealed wherever IP68 protection is required.

Yes. LEDSupply can provide cut-to-length strip, soldered leads, custom wiring, project or BOM review, custom quotes and assembly when needed. Send the project details to sales@ledsupply.com.