MicroPuck Online Data Sheet |
|
2009 MicroPuck Description:
The LuxDrive™ 2009 MicroPuck modules are current regulated drivers for powering LEDs. Unlike standard power supplies, which deliver a fixed voltage to the output, the MicroPuck uses proprietary drive electronics to deliver a fixed current. The MicroPuck is designed for powering a single high-output LED or a string of 5mm LEDs from low DC voltages (AA batteries). MicroPucks have been designed to provide maximum illumination to the LED while still mimicking the light dropoff of an incandescent bulb, which dims as the batteries are used up. Unlike an incandescent bulb, the driver's current consumption drops at very low voltages, allowing usable light to be produced much longer than conventional flashlights. Battery recovery (after the flashlight has been off) is also improved.
The standard offering is a 0.45"L x 0.3"W X 0.26"H. The unit is supplied with 24 AWG 6" colored leads. For additional details please view respective product pages by clicking on the selections below: |
