6W Phihong 700mA Constant Current AC Driver

Description

The Phihong PDA006A-700C is a low-profile 6-Watt LED driver for both indoor and architectural (outdoor) lighting. This driver will take your line voltage and output 2.5-7.5V in order to run your LEDs at a constant current of 700mA. Input and output connections can be made via the terminal blocks on either side and there are mounting holes on either side so you can easily mount this driver wherever you need with a couple screws.

Added Protection

• Input Current Protection: The input power line will be fused with a 1 Watt/3.9 Ohm resistor
• Short Circuit Protection: Automatically restart without any damage
• Output Over Voltage Protection: Output should not exceed 12V or driver will automatically shut down
• Open Circuit Protection: When circuit is open, output voltage should be less than 12V at nominal AC input

Technical Documentation

Output Specifications

CHARACTERISTICS

Characteristics

Unit

Typical

Leakage Current

mA

<0.5ma at="" 120vac="" and="" maximum="" load="" div="">

Maximum Input Current

mA

<100ma at="" full="" load="" 90vac="" div="">

Weight

grams

40

Efficiency

%

70% minimum at nominal input voltage, full load

Turn-on/Turn off delay time

Seconds

0.5ms maximum

Operating Temperature

°C

-20 to +50

Storage  Temperature

°C

-20 to +70

Dimensions

mm/inch

(L) 58mm (2.28in) X (W) 35mm (1.38in) X (H) 20.5mm (0.81in)

Warranty

Yrs

3

Full Documentation

PDA006A-700C Documentation