PWM 12V LED Amplifier (Repeater)
|Input Voltage: 12V or 24Vdc||3 Channel Output: 6A per Channel|
|Maximum Load: 210W||Dimensions: 1" (H) X 2.5" (W) X 5" (L)
|Two Power Input Connections||One Signal Output to Dimmer|
|Pair with 12V PWM Dimmer LS-PWM-6A||1-Year Warranty|
The LS-3R-6A (designed for use with PWM Dimmer LS-PWM-6A) is a Pulse Width Modulated (PWM) repeater or LED amplifier for dimming larger than 72-Watt runs of LEDs from one dimmer.
The LED repeater can handle 12V-24Vdc input upto 210-watts and comes with two separate input connections should you need it. The output of the repeater has 3-channels, each capable of a 6 amp (6A) load. Finally the the last connection is from the repeater to the dimmer. See figure 1 to the right for more details on connections.
|DIMMING METHOD||PULSE WIDTH MODULATION (PWM)|
|VOLTAGE||12VDC - 24VDC|
|MAXIMUM LOAD||6A per Channel or 210W|
|Connections||Screw-down Terminal Block|
WARNING: These products may represent a possible shock or fire hazard if improperly installed or attached in any way. Products should be installed in accordance with these instructions, current electrical codes and/or the current National Electric Code (NEC). Install in a well-ventilated area free from explosive gases and vapors. Proper operation requires the free flow of air.
Full Documentation & Installation Instructions
Products You May Like
The 4016 series LUXdrive™ QuadPuck 4-Channel DMX interface is a low voltage DC input (5-32Vdc) module for controlling high-brightness LEDs.
Product ID : 04016
Sale Price: $99.98
Product is out of stock
Single color PWM LED dimmer with radio frequency remote used for wireless dimming of 12Vdc LED strip lighting.
Product ID : DIMMER-1CH-12A
Sale Price: $8.99